Remote Operations
3 While the messages are playing, you can do any of the following:
• Repeat: To listen to a message a second time, press 2 | and | on the | ||
telephone before that message ends. To move back to the previous | ||||
message, press 2 and | during the first 3 seconds of the current | |||
message. |
|
|
|
|
• Skip forward: To skip forward to the next message, press | 5 | and | ||
on the telephone. |
|
|
|
|
• Stop: To stop playback, press | 0 and | on the telephone. After this, | ||
you can enter any of the commands described in the following section, Other remote operations.
•Play new messages: To listen to only your new messages, first stop
playback by pressing 0 and | , and then press 6 and | . |
•Erase a message: To erase the message you are currently listening to,
press 3 and 
before it ends.
4 When you have finished listening to your messages, you can do any of the following:
• | Erase all messages: Press | 3 , | 3 , and | . |
• | Repeat playback: Press 7 | and | . |
|
•Perform other operations: You can enter any of the commands described in the following section, Other remote operations.
•Hang up: If you do not erase your messages first, they will be saved and any new messages will be recorded after them. If you want the machine to
resume normal operation immediately, press 
twice before hanging up (in some cases, particularly when the Transfer function is used, the machine may not accept new calls for one or two minutes after you hang up
unless you press 
twice).
Answering | Machine |
2. |
|
39
