Sharp UX-A260 Optional Reception Settings, Fax Signal Receive, Reception Ratio, Receiving, Faxes

Optional Reception Settings

Optional Reception Settings

Fax Signal Receive

Your fax will automatically begin reception if you hear a soft fax tone after answering a call on your fax or an extension phone. If you use a computer fax modem to send documents on the same line, you must turn this function off in order to prevent your fax from mistakenly attempting to receive documents from the computer fax modem. Follow the steps below to change the setting.

1	Press FUNCTION once and		once.	Display:
				OPTION SETTING
2	Press	once and	4 times.	FAX SIGNAL RX
3	Press	once.		1=YES, 2=NO
4	Press	1 to turn on the function, or		The display briefly shows
				your selection, then:
	2 to turn it off.			CALLER-ID
5	Press	STOP
		to return to the date and time display.

Receiving	Faxes
4.

Reception Ratio

The fax has been set at the factory to automatically reduce the size of received documents to fit the size of the printing paper. This ensures that data on the edges of the document are not cut off. If desired, you can turn this function off and have received documents printed at full size.

♦If a document is too long to fit on the printing paper, the remainder will be printed on a second page. In this case, the cut-off point may occur in the middle of a line.

♦Automatic reduction may not be possible if the received document is too large, contains too many fine graphics or images, or is sent at high resolution. In this case, the remainder of the document will be printed on a second page.

63