14
RQTX1267
With this function it is possible to check the signal reception
quality of a selected frequency.
If the reception quality is poor, try adjusting the antenna.
Preparation
≥Press [EXT-IN, RADIO] repeatedly to select “DABr”.
1Press [RADIO MENU] repeatedly to select
“SIGNAL QUALITY”.
2Press [2,1] to select the frequency.
≥After displaying the frequency, the current reception quality
is displayed.
3To continue checking the quality of other frequencies
Press [2,1] again and select the desired
frequency.
To exit
Press [RADIO MENU].
≥If the antenna has been adjusted, perform Auto scanning and
update the station memory. (>below)
When new stations are added or when the antenna has been
moved, reperform the Auto scan.
1Press [RADIO MENU] repeatedly to select
“AUTOSCAN” and then press [OK].
2While “START ?” is flashing,
Press [OK].
≥When updating the memory with Auto scan, preset stations will be erased.
Preset them again (>right).
≥When a frequency is tuned using Auto scanning, the ensemble corresponding
to the frequency is displayed for approximately 2 seconds.
≥Total stations received is displayed for approximately 2 seconds.
On this unit, there are 2 ways of selecting the desired station.
Preparation
≥Press [EXT-IN, RADIO] repeatedly to select “DABr”.
≥Make sure that the initial settings are made. (>13)
To select by station (alphanumeric order)
Press [6] or [5] to select a station.
To select by preset
Press [:] or [9] to select a preset station.
≥Alternatively, press the numeric buttons to select the channel.
≥To select by preset, make sure that stations have already been preset
manually. (>below)
You can preset up to 20 DAB channels.
Preparation
≥Press [EXT-IN, RADIO] repeatedly to select “DABr”.
1Press [6] or [5] to select the station.
2Press [PROGRAM].
3Press the numeric buttons to select the
channel.
≥You cannot preset stations when the station is not broadcasting or when the
secondary service is selected.
≥The station occupying a channel is erased if another station is preset in that
channel.
If the station is providing secondary service, “ ” will be
displayed. It is possible to change between the primary and
secondary service.
Preparation
≥While listening to the primary service.
1Press [RADIO MENU] repeatedly to select
“SECONDARY” and then press [OK].
2Press [2,1] to select the secondary service
and press [OK].
≥The setting will go back to primary service when changes are made (e.g.
frequency is changed).
Checking the DAB signal
reception quality
To re-Auto scan DAB stations
Frequency
block Frequency
Listening to DAB stations
Presetting stations manually
Listening to the secondary
service
SC-HC55DB&35GN-RQTX1267-B.book 14 ページ ２０１１年２月１８日 金曜日 午後５時５８分