9
RQTX1267
Opening/Closing the
sliding door
Preparation
Press [Í] to turn the unit on.
For disc operations:
AWhile the sliding door is closed, press [CD <]
to open the sliding door.
For iPod/iPhone operations:
BWhile the sliding door is closed, press [iPod <]
to open the sliding door.
∫Closing the sliding door
Press [CD <] or [iPod <] again.
≥Keep fingers away from the sliding door when it is closing to avoid possible
minor injuries.
≥Damage may occur if the sliding door is forced closed.
≥Be careful of CD hitting the sliding door while being removed.
≥The sliding door will not close if the docking switch lever is not returned to the
original position.
With this function the sliding door can be opened without
pressing a button. The sliding door will open or close by moving
the palm of your hand over the sensors on the top of the unit.
For disc operations:
Place the palm of your hand over sensor B and
then move it over sensor A.
≥To close the sliding door, place the palm of your hand over
sensor A and then move it over sensor B.
For iPod/iPhone operations:
Place the palm of your hand over sensor A and
then move it over sensor B.
≥To close the sliding door, place the palm of your hand over
sensor B and then move it over sensor A.
∫To change the setting of the open/close sensor
The sensitivity of the sensor can be changed to increase or
decrease the activating area of the open/close sensor.
Press [OPEN/CLOSE SENSOR] repeatedly to
select “MODE 1”, “MODE 2”, “MODE 3” or
“OFF SENSOR”.
Select the mode that allows correct operation.
≥Factory preset: “MODE 2”
≥To turn the open/close sensor off, select “OFF SENSOR”.
∫To change the sound effect settings of the
open/close sensor
1Press [SOUND] repeatedly to select “BUZZER”.
2Press [2] or [1] to select the following setting.
≥A red light is lit from the position of the sensor. This is normal.
≥The open/close sensor might be unintentionally activated if an object, hand,
part of your arm, pets or children move over the top of the unit.
≥If the open/close sensor does not react, move the palm of your hand closer to
the top of the unit and change the speed that you move your hand.
≥If the open/close sensor does not work, try changing the sensor’s setting. If it
still does not work, open/close the sliding door using the buttons on the unit or
the remote control.
≥When the sensor setting is changed to “MODE 1”, move your hand closer
(approx. 3 cm) over the unit.
≥The disc operation side of the sliding door will not open during CD playback
or pause.
Opening the sliding door
AB
[HC55]
Open/Close sensor
LOW: Set the sound effect level to low.
MID: Set the sound effect level to medium.
HIGH: Set the sound effect level to high.
OFF: Turn the sound effect off.
ンモュリヰ
ヷヰロヶヮユ
ヷヰロヶヮユ
SC-HC55DB&35GN-RQTX1267-B.book 9 ページ 2011年2月18日 金曜日 午後5時58分