Panasonic SC-HC35, SC-HC55DB installation instructions Listening to audio from a USB device, Others

Listening to audio from a USB device

Compatible devices

Devices which are defined as USB mass storage class: USB devices that support bulk only transfer

USB devices that support USB 2.0 full speed

Notes on USB

≥Supported format: Files with extension “.mp3” or “.MP3”

≥CBI (Control/Bulk/Interrupt) is not supported.

≥FAT12, FAT16 and FAT32 file systems are supported.

≥Depending on the sector size, some files may not work.

≥This unit can access up to 254 albums (excluding Root folder) and 2500 tracks.

≥The maximum number of tracks in a folder is 999 tracks.

≥Only one memory card will be selected when connecting a multiport USB card reader, typically the first memory card inserted.

≥Disconnect the USB card reader from the unit when you remove the memory card. Failure to do so may cause malfunction to the device.

≥When you connect the digital audio player to the USB port, it charges all the time when the unit is on.

Others

Changing the main unit and remote control mode

Other Panasonic audio/video equipment may start functioning when you operate the unit using the supplied remote control. You can operate this unit in another mode by setting the remote control operating mode to “REMOTE 2”.

The main unit and remote control must be set to the same mode.

1 Press [EXT-IN, RADIO] to select “AUX”.

2 Press and hold [RADIO/EXT-IN] on the main unit and [2] on the remote control until the main unit’s display shows “REMOTE 2”.

3 Press and hold [OK] and [2] on the remote control for at least 4 seconds.

To change the mode back to “REMOTE 1”, repeat the steps above by replacing [2] with [1].

USB operations

The USB connectivity enables you to connect and play MP3 tracks from a USB device.

Preparation:

≥Before connecting any USB device to this unit, be sure to back up the data.

≥It is not recommended to use a USB extension cable. The device connected via the cable will not be recognized by this unit.

1 Plug the USB device into the unit. (> 5)

2 Press [EXT-IN, RADIO] repeatedly to select “USB”.

3 Press [1/;] to start play.

Stop	Press [∫].
	≥ The position is memorized while “RESUME” is
	displayed.
	Press [1/;] to resume play.
	Press [∫] again to clear the position.
Pause	Press [1/;].
	≥ Press [1/;] again to restart play.
Skip	Press [:] or [9]. (Track)
	Press [3, 4]. (Album)
Direct access play	1 Press [3, 4] to select the album.
(Play starts with	2 Press [9] once and then the
the track you	numeric buttons to select the track.
select.)

≥Before removing the USB device, select a source other than “USB”.

≥Removing the USB device while it is selected can damage the data stored in

the device.

For other operating functions, they are similar as those described in “Disc operations”.

Memory reset (Initialization)

When the following situations occur, reset the memory:

≥There is no response when buttons are pressed.

≥You want to clear and reset the memory contents.

1 Disconnect the AC mains lead. (Wait for at least 3 minutes before proceeding to step 2.)

2 While pressing and holding down [Í/I] on the main unit, reconnect the AC mains lead.

“--------” appears on the display.

3 Release [Í/I].

All the settings are returned to the factory preset. You will need to reset the memory items.

RQTX1267

19