Nortel Networks 2300 Series manual Set dot1x wep-rekey-period, Show dot1x

802.1X Management Commands 517

Usage Reauthentication is not required for WEP key rotation to take place. Broadcast and multicast keys are always rotated at the same time, so all members of a given radio, VLAN, or encryption type receive the new keys at the same time.

Examples Type the following command to disable WEP key rotation:

WSS# set dot1x wep-rekey disable

success: wep rekeying disabled

See Also

•set dot1x wep-rekey-period on page 507

•show dot1x on page 507

set dot1x wep-rekey-period

Sets the interval for rotating the WEP broadcast and multicast keys.

Syntax set dot1x wep-rekey-period seconds

seconds Specify a value between 30 and 1,641,600 (19 days).

Defaults The default is 1800 seconds (30 minutes).

Access Enabled.

Examples Type the following command to set the WEP-rekey period to 300 seconds:

WSS# set dot1x wep-rekey-period 300

success: dot1x wep-rekey-period set to 300

See Also

•set dot1x wep-rekey on page 506

•show dot1x on page 507

show dot1x

Displays 802.1X client information for statistics and configuration settings.

Syntax show dot1x {clients stats config}

clients	Displays information about active 802.1X clients, including client name,
	MAC address, and state.
stats	Displays global 802.1X statistics associated with connecting and
	authenticating.
config	Displays a summary of the current configuration.
Defaults	None.

Nortel WLAN—Security Switch 2300 Series Command Line Reference