Nortel Networks 2300 Series Show security acl info, Syntax show security acl hits, Editbuffer

Security ACL Commands 473

Syntax show security acl hits

Defaults None.

Access Enabled.

Usage For WSS Software to count hits for a security ACL, you must specify hits in the set security acl commands that define ACE rules for the ACL.

Examples To display the security ACL hits on a WSS, type the following command:

WSS# show security acl hits

ACL hit-counters

Index Counter	ACL-name
----- -------------------- --------
1	0 acl_2
2	0 acl_175
3	916 acl_123

See Also

•hit-sample-rate on page 453

•set security acl on page 454

show security acl info

Displays the contents of a specified security ACL or all security ACLs that are committed—saved in the running config- uration and nonvolatile storage—or the contents of security ACLs in the edit buffer before they are committed.

Syntax show security acl info [acl-nameall] [editbuffer]

acl-name		Name of an existing security ACL to display. ACL names must start with
		a letter and are case-insensitive.
all		Displays the contents of all security ACLs.
editbuffer		Displays the contents of the specified security ACL or all security ACLs
		that are stored in the edit buffer after being created with set security acl.
		If you do not use this parameter, only committed ACLs are shown.
Defaults	None.
Access	Enabled.
History
WSS Software		The acl-name all option is no longer required; show security acl info is
Version 4.1		valid and displays the same information as security acl info all.

Examples To display the contents of all security ACLs committed on a WSS, type the following command:

WSS# show security acl info

ACL information for all

Nortel WLAN—Security Switch 2300 Series Command Line Reference