Nortel Networks 2300 Series Show ap boot-configuration, Output for show ap boot-configuration

380AP Commands

show ap boot-configuration

Displays information about the static IP address configuration (if any) on a AP.

Syntax show ap boot-configuration ap-num

ap-num Index value that identifies the AP on WSS.

Defaults None.

Access Enabled.

History

Version 4.1 Command introduced in WSS Software.

Version 6.0 Option dap removed.

Field Mesh added

Field Mesh SSID added

Field Mesh PSK added

Examples The following command displays static IP configuration information for AP 1:

WSS# show ap boot-configuration 1

Flags: 0

AP: 1

IP Address: Disabled

VLAN Tag: Disabled

Switch: Disabled

Mesh: Disabled

IP Address:

Netmask:

Gateway:

VLAN Tag:

Switch IP:

Switch Name:

DNS IP:

Mesh SSID:

Mesh PSK:

Table 44 describes the fields in this display.

	Table 18: Output for show ap boot-configuration
Field	Description
AP	AP number.
VLAN Tag	The VLAN tag that the AP is configured to use (if any).

NN47250-100 (Version 02.51)