Special, Preset Save Save configured preset | Samsung SID-500

Operating Your Camera

SPECIAL

SPECIAL		SETUP
USER	PRESET	OFF
PRIVACY		OFF
DAY/NIGHT		COLOR
SYNC		INT
COMM	ADJ
IMAGE	ADJ
END

1.Press the SET button to access the main setup menu and then position the indicator over 'SPECIAL' using the UP or DOWN button.

2.Press the SET button to confirm.

USER PRESET:

Preset user-designated configurations using this feature. Position the indicator over 'USER PRESET' using the UP or DOWN button and then set to 'ON' using the LEFT or RIGHT button. Press the SET button to confirm.

SPECIAL		SETUP
USER	PRESET	OFF
PRIVACY		OFF
DAY/NIGHT		COLOR
SYNC		INT
COMM	ADJ
IMAGE	ADJ
END

COLOR CCD CAMERA 36 User’s Manual

•PRESET NO : Up to eight different preset configurations are supported.

USER PRESET SETUP

PRESET NO. NO. 1

PRESET MODE OFF

PRESET SAVE

PRESET CLEAR

END

PRESET DEFINED

•PRESET MODE: Configure initial settings under FOCUS, EXPOSURE, etc.

•PRESET SAVE: Save configured preset.

USER PRESET SETUP

PRESET NO. NO. 1

PRESET MODE OFF

PRESET SAVE

PRESET CLEAR

END

PRESET DEFINED

COLOR CCD CAMERA 37 User’s Manual

Image 19

Samsung SID-500 user manual Special, Preset Save Save configured preset

Contents

10X Zoom SID-500 Series 10x Optical Zoom Features Contents Never keep the camera face to strong light directly Precautions Overview Installation Installation Select either 85X85 or When installing on a adapter plate Connection Connecting to Power RS-485 communication control Menu ConfigurationConnection Operating Your Camera Use the six buttons on back of the camera Menu SetupSet CAM Title to on using the Left or Right button CAM Title Correcting Mistakes When completed, move the cursor to END and press SET button Three white balance control modes are as follows Set White BAL using the Left or Right buttonWhite Balance Control Backlight Press the SET button Motion DetectionFocus On Any motion in the selected areas is observed Can be manually adjusted, independent of moving zoom ONE Push Focus is automatically adjusted just onceManual Select Manual and press the SET button Exposure END To revert to the main setup menuPress the SET button to confirm FLK Ntsc 1/100, PAL 1/120 Flicker-free mode Shutter Control image brightness by adjusting shutter speedAuto The iris is automatically activated upon illumination AGC Auto Gain Control For brighter images DisabledDisabled OFF Disabled Special Preset Save Save configured preset DAY/NIGHT Select from COLOR, BW or Auto modes Preset Clear Clear configured presetEND Revert to the Special Setup menu Color Color mode BW mode Exit ResetTo reset your camera to factory default condition To finish setup menu Specifications Troubleshooting Communication Dimension Declaration of Conformity