Samsung SID-500 user manual Connection, Operating Your Camera, RS-485 communication control

Connection

RS-485 communication control

Connecting to RS-485 Control Cable

CONTROL CABLE	SPEC
RED (TRX+)	RS-485+
WHITE(TRX-)	RS-485-

Using a RS-485 communication, it will be able to control the ZOOM/FOCUS and OSD menu at the SAMSUNG TECHWIN System Controller or DVR.

(1)The case which it controls from the PC

Using a RS-485 converter, It connects to RS-485 control cable outside camera and serial cable

EX) SERIAL PORT OF THE PC(COM1) — SERIAL CABLE -- RS-485 CONVERTER

--RS-485 CONTROL CABLE

(2)The case which it controls from the DVR or System Controller

It connects the RS-485 control cable in the connection terminal of 485 control boards which are connected with the DVR or System Controller.

485 CONTROL BOARD CONNECTION TERMINAL	RS-485 CONTROL CABLE
(+)CONNECTION TERMINAL	RED (TRX+)
(-)CONNECTION TERMINAL	WHITE(TRX-)

Notes

•When you construct external control systems for a camera control, please use to the SAMSUNG TECHWIN PROTOCOL or PELCO-D PROTOCOL.

•When you connecting to RS-485 control cable, please peel off the outer skin inside the RS-485 control cable.

COLOR CCD CAMERA 18 User’s Manual

Operating Your Camera

Menu Configuration

MAIN SETUP MENU

CAM TITLE	• OFF	• ON
WHITE BALANCE	• ATW(OUTDOOR)	• AWC SET	• MANUAL
BACKLIGHT	• OFF	• LOW	• MIDDLE
	• HIGH
MOTION DET	• OFF	• ON
FOCUS	• MODE	• ZOOM TRK
	• ZOOM SPEED	• D-ZOOM
	• DISP ZOOM MAG	• ZOOM POS INIT
	• LENS INIT	• END
EXPOSURE	• BRIGHTNESS	• IRIS	• SHUTTER
	• AGC	• SSNR	• SENS-UP
	• END
SPECIAL	• USER PRESET	• PRIVACY	• DAY/NIGHT
	• SYNC	• COMM ADJ	• IMAGE ADJ
	• END
RESET
EXIT

COLOR CCD CAMERA 19 User’s Manual