Nortel Networks 2300 Series manual Set service-profile auth-dot1x

AP Commands 317

The following command assigns users accessing the SSID managed by service profile sp2 to the Mobility Profile tulip.

WSS# set service-prof sp2 attr mobility-profile tulip

success: change accepted.

The following command limits the days and times when users accessing the SSID managed by service profile sp2 can access the network, to 5 p.m. to 2 a.m. every weekday, and all day Saturday and Sunday:

WSS# set service-prof sp2 attr time-of-day Wk1700-0200,Sa,Su

success: change accepted.

See Also

•show service-profile on page 380

•show sessions network on page 439

set service-profile auth-dot1x

Disables or reenables 802.1X authentication of Wi-Fi Protected Access (WPA) clients by AP radios, when the WPA information element (IE) is enabled in the service profile that is mapped to the radio profile that the radios are using.

Syntax set service-profile name auth-dot1x {enable disable}

name	Service profile name.
enable	Enables 802.1X authentication of WPA clients.
disable	Disables 802.1X authentication of WPA clients.

Defaults When the WPA IE is enabled, 802.1X authentication of WPA clients is enabled by default. If the WPA IE is disabled, the auth-dot1xsetting has no effect.

Access Enabled.

Usage This command does not disable dynamic WEP for non-WPA clients. To disable dynamic WEP for non-WPA clients, enable the WPA IE (if not already enabled) and disable the 40-bit WEP and 104-bit WEP cipher suites in the WPA IE, if they are not already disabled.

To use 802.1X authentication for WPA clients, you also must enable the WPA IE.

If you disable 802.1X authentication of WPA clients, the only method available for authenticating the clients is preshared key (PSK) authentication. To use this, you must enable PSK support and configure a passphrase or key.

Examples The following command disables 802.1X authentication for WPA clients that use service profile wpa_clients:

WSS# set service-profile wpa_clients auth-dot1x disable

success: change accepted.

Nortel WLAN—Security Switch 2300 Series Command Line Reference