Nortel Networks 2300 Series manual Ciphers-Lists the cipher suites advertised by, Profile, Period

AP Commands 395

Table 24: Output for show service-profile (continued)

Field	Description
WEP Key 3 value	State of static WEP key number 3:
	• none—The key is not configured.
	• preset—The key is configured.
WEP Key 4 value	State of static WEP key number 4:
	• none—The key is not configured.
	• preset—The key is configured.
WEP Unicast Index	Index of the static WEP key used to encrypt unicast traffic on an
	encrypted SSID.
WEP Multicast Index	Index of the static WEP key used to encrypt multicast traffic on
	an encrypted SSID.
Shared Key Auth	Indicates whether shared-key authentication is enabled.
WPA enabled	Indicates that the Wi-Fi Protected Access (WPA) or Robust
or	Security Network (RSN) information element (IE) is enabled.
RSN enabled	Additional fields display the settings of other WPA or RSN
	parameters:
	• ciphers—Lists the cipher suites advertised by
	radios in the radio profile mapped to this service
	profile.
	• authentication—Lists the authentication methods
	supported for WPA or RSN clients:
	•	802.1X—dynamic authentication
	•	PSK—preshared key authentication
	• TKIP countermeasures time—Indicates the
	amount of time (in ms) WSS Software enforces
	countermeasures following a second message
	integrity code (MIC) failure within a 60-second
	period.
	Note: These fields are displayed only when the WPA IE or
	RSN IE is enabled.
vlan-name, session-timeout,	These are examples of authorization attributes that are applied by
service-type	default to a user accessing the SSID managed by this service
	profile (in addition to any attributes assigned to the user by a
	RADIUS server or the local database).

Attributes are listed here only if they have been configured as default attribute settings for the service profile.

See Table 29 on page 198 for a list of authorization attributes and values that can be assigned to network users.

Nortel WLAN—Security Switch 2300 Series Command Line Reference