4.5Printer Setup Mode - Button Functions
In ‘Printer Setup’ mode, the buttons control the setting of the printer’s operational items such as media settings, communications, and options as detailed below.
;Notes: It is recommended that the Printer Setup Mode not be entered while in Peel Mode or with the optional Present Sensor enabled. Depending on label size this can cause unpredictable results.
Printer and cutter faults are disabled during 
, but can still occur while printing “test” labels.
If at any time you wish to discard your changes and revert back to the previous values, simply turn off power to the printer. If you wish to restore Factory Defaults see Section 5.7.
To change Printer Setup:
PAUSE 
(Press and hold during 
STOP light turns off)
Printer Setup Mode
PAUSE Prints the ‘Printer Setup Menu List’, see section 4.5.1 | |||||
FEED (PressReleaseand)Feeds one label for “test” | |||||
FEED | (PressHoldand) (Enters Printer Setup) | ||||
CANCEL Prints the ‘Test Label’ for “test” | |||||
PAUSE | Saves the current values | ||||
+ | |||||
and resumes Normal Mode | |||||
CANCEL | |||||
|
|
|
| ||
Printer Setup Procedure | (Current Item and Value is printed) | ||||
PAUSE |
| Increments item’s value | |||
FEED |
| (PressReleaseand)Selects the next menu item | |||
|
| Press and | ”Direct Select” menu item | ||
|
| ( | Hold | ) eg. 7 Error light flashes = Baud Rate menu item #7 | |
CANCEL | Decrements item’s value | ||||
PAUSE |
| Accepts the current | |||
+ |
| ||||
| values for “test” | ||||
CANCEL |
|
|
| ||
| 19 |
