Datamax M-4206 manual Align Length Stop Location

19) ALIGN LENGTH			20) STOP LOCATION
Leading edge distance of two			Sets label stopping (and in certain cases the starting)
successive labels. Must be entered if			location for different printer configurations.
‘LABEL ALIGNMENT’ is set to			Possible Values:
Yes (see Section 4.6).
Possible Values:			* AUTO	(Automatically sets the stop location. Installed
				options will be ‘auto-sensed’ and the
0 – 999; default =100*				appropriate stop position will automatically
(Units = .01 inch)				be set. Host commands are ignored.)
			HOST	(Sets stop position according to options
				installed. If no options are installed the printer
				sets stop location to the next label’s start of
				print. Host commands will override.)
21) INPUT MODE			22) DPL EMULATION
Selects between the standard or			This instructs the firmware to process specific DPL data
template interpretation of incoming			(Start of Print, DPI, and Imaging function) according to
data.			the selected printer emulation.
Possible Values:			Possible Values:
* DPL	(printer constructs the label		* STANDARD
	using the standard DPL		ALLEGRO (Allegro Emulation)
	commands)		P PLUS (Prodigy Plus Emulation)
LINE	(printer constructs the label
			PRODIGY (Prodigy Emulation)
	using a preloaded template
	form)
		23) HEAT
		Controls the ‘burn-time’ of the printhead. This is the equivalent of
		Heat Setting on most label software programs.
		Possible Values:

Range: 0 – 30; default = *10

; Note: All of the menu items listed in the previous section are stored in non-volatile memory.

M-4206 23