3.3Media Sensor Adjustment

The Media Sensor needs to be positioned so that the printer can detect the presence of media and the top-of-form (except for continuous stock, where the TOF is set through the front panel, (see CONT FORM LENGTH’, Section 4.5.2). To adjust:

nWith media loaded, as described in Section 3.2, grasp the Slide Tab and move the Sensor Eye Mark into position over media according to the table below.

oIf loading media, return to the media loading instructions.

Media Sensor Selection and Adjustment

 

Media Type

Sensor Eye Mark Position

Sensing

 

 

 

 

Required*

 

 

Die-cut

Near the middle of the label

Gap

 

 

Notched

Centered over the notch

Gap

 

 

Reflective

Centered over the black mark

Reflective

 

 

Continuous

Near the middle of the media

Continuous

 

*See Section 4.5.2 for Sensor Type selection.

12

M-4206

Page 18
Image 18
Datamax M-4206 manual Media Sensor Adjustment, Sensor Eye Mark Position