Nortel Networks 2300 Series manual Show ip route, Output for show ip https, Destination

IP Services Commands 163

Table 8: Output for show ip https

Field	Description
HTTPS is enabled/disabled	State of the HTTPS server:
	•	Enabled
	•	Disabled
HTTPS is set to use port	TCP port number on which the WSS listens for HTTPS
	connections.
Last 10 connections	List of the last 10 devices to establish connections to the WSS’s
	HTTPS server.
IP Address	IP address of the device that established the connection.
	Note: If a browser connects to a WSS from behind a proxy, then
	only the proxy IP address is shown. If multiple browsers connect
	using the same proxy, the proxy address appears only once in the
	output.
Last Connected	Time when the device established the HTTPS connection to the
	switch.
Time Ago (s)	Number of seconds since the device established the HTTPS
	connection to the switch.

See Also

•clear ip telnet on page 102

•set ip https server on page 116

•set ip telnet on page 120

•set ip telnet server on page 120

•show ip telnet on page 155

show ip route

Displays the IP route table.

Syntax show ip route [destination]

destination Route destination IP address, in dotted decimal notation.

Defaults None.

Access All.

Nortel WLAN—Security Switch 2300 Series Command Line Reference