Lenoxx Electronics CD-108 Troubleshooting, General, CD player Radio Tape player

Troubleshooting

Problem

General	The power is not on.
	There is no sound.

Remedy

•Connect the AC power cord to a wall outlet securely.

•Make sure the batteries are inserted correctly and they are fresh.

•Make sure the Function Switch is at the right position as you want.

•Adjust the volume.

•Unplug the headphones when listening through speakers.

CD player

Radio

Tape player

“ ” appears in the display	• Insert the CD with the label side facing you.
even when a CD is in place.
	•	Make sure that the CD compartment is
CD does not play.	•	closed.
		Place the CD with the label side facing you.
	•	Clean the CD.
	•	Take out the CD and leave the CD door
		open for about an hour to dry moisture
	•	condensation.
		Make sure the Function Switch is at CD
		position.
	•	Clean the CD, or replace it if the CD is
The sound drops out.	•	badly damaged.
		Place the player in a location free from
	•	vibration.
		Check if your batteries are fresh.
The sound is weak or has poor	•	Replace all the batteries with new ones if
quality.		they are weak, or bring the set near a
		window, or rotate the set.
The Record Button does not	•	Make sure the safety tab on the cassette
function / The tape does not	•	is in place.
play.		Make sure the Function Switch is at TAPE
		position.
The tape does not erase	•	Clean the erasing head (see page 17).
completely.		Replace all the batteries with new ones if
	• they are weak.
The tape does not record.	• Make sure the tape is inserted properly.
	•	Make sure the safety tab of the cassette
		is in place.
The sound is weak / The sound	•	Clean the heads, pinch roller and capstan
quality is poor.		(see page 17).
Cassette Play Button pops up.		The tape has reached its end. Remove it,
	• flip to the other side and re-insert.
		18	CD-108072799 v.1 E