HP Manager Software manual To disable a specific instance of a warning or error

330CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS

Disabling a Rule from All 3WXM rules are enabled by default. If you want 3WXM to stop the Message List alerting you about a specific error or warning, you can disable the rule for

that error or warning.

You can disable rules on a per-instance basis or globally for all instances.

„If you disable a rule for a specific instance, 3WXM stops alerting you about that particular instance but still uses the rule when evaluating other configurations.

„If you disable a rule for all instances, 3WXM stops using that rule altogether when verifying a configuration.

Rules that are disabled for all instances are disabled on a per-user basis, not a per-plan basis. When you disable all instances of a rule, the rule is disabled for any network plan that you open while you are logged on with the 3WXM client user name you were logged on with when you disabled the rule.

To disable a specific instance of a warning or error

1Select the warning or error message.

2In the Resolutions section, click disable this rule for this instance only.

As soon as you click on this option, the message disappears from the list. 3WXM will not display this particular instance of the message again.

To globally disable a warning or error

1Select an instance of the warning or error message.

2In the Resolutions section, click disable this rule for all instances.

As soon as you click on this option, all instances of the message disappear from the list. 3WXM will not display the message again.

Changing Verification By default, 3WXM verifies configuration information in the following Options cases:

„When the WX switch’s configuration is changed in 3WXM.

„When you deploy or export a WX switch from 3WXM to the network.

„When you upload a WX switch from the network into 3WXM.

3WXM verifies the WX switch’s entire configuration by default each time a change occurs.