HP Manager Software manual Click Generate

452CHAPTER 12: GENERATING REPORTS

Generating a Site The site survey order contains the locations and MAC addresses of the

Survey Order line-of-site (LOS) points for use when conducting a site survey, and also provides a GIF image of the floor.

For the site survey order to be meaningful, you must specify the line-of-site (LOS) points first. (See “Placing RF Measurement Points” on page 169.)

To generate a site survey order

1Select Reports > Site Survey Order from the toolbar in the main 3WXM window.

The Site Survey Order Generation dialog box appears.

2Select the scope for the work order. You can select the network plan, a site, a building, or an individual floor.

3Select the language:

„English

„German

4To change the output directory for the report, click on the button next to output directory, navigate to the new directory, and click Select.

5Click Generate.

6When the report is generated, click View. A browser window containing the report opens.

7Optionally, select the floor.

8Click View Site Survey Order. The site survey order appears. LOS point information for the selected floor is displayed.

Scroll down to view the MAC address assignments for the LOS points.

Use the instructions in the Ekahau Site Survey Initial Setup section of the work order to set up the survey.

When you import the floor map into the site survey tool, make sure you use the map name specified in the work order. The site survey data will not appear when you import RF measurements into 3WXM unless the map name is correct.