Installing 3WXM 23

Installing 3WXM Installing 3WXM involves the following tasks:

„Unpack files. (See “Unpacking Files” on page 23.)

„Use the installation wizard. (See “Using the Installation Wizard” on page 24.)

„Install the HP OpenView plug-in (optional). (See “Installing the HP OpenView Plug-In” on page 27.)

„Perform the licensing steps. (See “Licensing” on page 28.)

The installation wizard for the 3WXM client has an option to install the monitoring service on the same machine. You must install the client in order to install the monitoring service. You cannot install the monitoring service separately.

Unpacking Files To unpack files on your Windows system, follow these steps.

1Insert the 3WXM CD in the CD-ROM drive. If Autorun is enabled, wait briefly for the install program to start. For more information about using the installation wizard, see “Using the Installation Wizard” on page 24.

If Autorun is disabled, follow these steps:

a In Windows Explorer, navigate to your CD-ROM drive. b In the Windows\VM directory, double-click install.exe.

The Introduction page of the 3WXM installation wizard appears.

2Go to “Using the Installation Wizard” on page 24.

Page 23
Image 23
HP Manager Software manual If Autorun is disabled, follow these steps