HP Manager Software manual To set the accounting method for administrator access

284CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS

You can add one or both methods to the list.

„If you specify a RADIUS server group as the first method and a user is denied access by the RADIUS server, no authentication and authorization are attempted with the other methods specified in the list.

„If you specify LOCAL as the first method and a user is not in the local user database on the WX, authentication and authorization are attempted with a RADIUS server group if one is defined in the method list.

The method you select for authentication is also used for authorization.

To add a server group, click Create and go to “To define a RADIUS server group” on page 268. After you create the server group, click Choose Available and then select the server group from the list.

4Do one of the following:

„To configure accounting, go to “To set the accounting method for administrator access”.

„To save changes and close the wizard, click Finish.

To set the accounting method for administrator access

1Click Accounting at the top of the wizard.

2To enable this accounting rule, select Enabled. By default, a rule you configure in 3WXM is disabled, which means 3WXM does not add the rule to a WX switch’s configuration.

3Select one of the following record options:

„Select Start-Stopto specify that records are sent at the start of a session and the end of a session.

„Select Stop-Onlyto specify that records are sent only at the end of a session.

4To select the accounting method, click Choose Available, then select the method from the list:

„RADIUS server group — A server group that you have configured previously.

„LOCAL — The WX switch’s local database.

You can add one or both methods to the list.