326CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS

To upload a WX switch configuration

1In the main 3WXM window, select Manage > Upload. The Upload Wireless Switch wizard appears.

2In the IP Address box, type the IP address for the WX switch.

3In the Enable Password box, type the enable password for the WX switch.

This password must match the enable password that was defined using the CLI command set enablepass. For more information, see the Wireless LAN Switch and Controller Configuration Guide.

4Click Next. The uploading progress is shown.

5Click Next. The Policies page is displayed.

The Current Policies window lists the policies that will be applied to the switch during the upload. All policies that are applicable to the switch model you are uploading, or are applicable to all switch models, are applied by default.

6To review the feature areas that are included in a policy, select the policy. The feature areas in the policy appear in the Details window.

7If you do not want 3WXM to apply a policy to the switch, select the policy, then click Remove. The policy is moved from the Current Policies list to the Available Policies list.

CAUTION: When you click Next, all the policies in the Current Policies list are automatically applied to the switch. 3WXM does not ask you to review the changes first. All parameters in the applied policies overwrite the settings on the switch.

8Click Next. The verification progress is shown.

When you upload a WX, its configuration is verified if the Verify before deployment and upload option is selected in the Preferences dialog box. (By default, this option is selected.) During verification, 3WXM checks the entire configuration for inconsistencies and dependencies. For more information, see “Verifying Configuration Information” on

page 327.

9Click Finish. If the upload is successful, the WX appears in the Equipment area of the Organizer panel.

If the upload is not successful, check the following:

„Make sure that the WX is running by using the ping command.

„Make sure that the WX certificate is properly installed.

Page 326
Image 326
HP Manager Software manual To upload a WX switch configuration