HP Manager Software manual To change the scope of the rogue list

428CHAPTER 11: DETECTING AND COMBATTING ROGUE DEVICES

To change the scope of the rogue list

1Select the scope in the Organizer panel.

2Select Show for selected scope in the toolbar of the Rogue Detection tab.

3WXM updates the rogue list to display only the rogues detected within the selected scope.

If you change the scope by selecting another object in the Organizer panel, or you deselect the Show for selected scope option, click Refresh to refresh the rogue list for the new scope setting.

Displaying Rogue To display details for a rogue, select the rogue in the rogue list. Details Details are displayed in the tabs in the right portion of the Rogue Detection tab.

Current, Current Hour, Current Day, and History Tabs

The Current, Current Hour, Current Day, and History tabs show rogues detected in the past.

„Current — Lists the rogues observed during the most-recent polling intervals.

„Current Hour — Lists the rogues observed during the most-recent hour.

„Current Day — Lists the rogues observed during the most-recent day.

„History — Lists the rogues observed during the most-recent 30-day period.

Each rogue is listed only once, even if multiple entries for the rogue appear in the Activity Log tab. For example, if a rogue is detected during three polling intervals, separate entries for each polling interval appear in the Activity Log. However, at the end of the hour, when the activity data is consolidated and moved to the Current Hour tab, only one entry appears on that tab for the rogue.

On each tab, the Polled Results column lists the time when the data was received from the monitoring service.