Accessing the WX Switch Wizard 187

To add a switch by If you have already deployed a WX switch in the network and you want uploading its basic to add the switch to the network plan, you can upload the switch’s configuration from configuration into 3WXM, edit the switch, then redeploy the switch with

the network the new parameters.

1Use the procedure in “Uploading a WX Switch Configuration into 3WXM” on page 325 to upload the switch.

2In the Organizer panel, select the new WX switch and do one of the following:

„Right-click on the switch, then select Edit.

„Select Config > Edit from the toolbar in the main 3WXM window.

To add a switch by You can add a switch to the network plan by importing a switch importing a configuration file.

configuration file

1Use the procedure in “Importing and Exporting WX switch Configuration Files” on page 342 to import the switch’s configuration file.

2In the Organizer panel, select the new WX switch and do one of the following:

„Right-click on the switch, then select Edit.

„Select Config > Edit from the toolbar in the main 3WXM window.

Accessing the WX

To add a new switch and access the WX Switch wizard to configure it,

Switch Wizard

see “Adding a WX Switch to the Network Plan” on page 186.

To access the WX Switch wizard for a switch that is already in the network plan, do the following:

1In the Organizer panel, select the WX switch you want to modify.

2Do one of the following:

„Right-click on the switch, then select Edit.

„Select Config > Edit from the toolbar in the main 3WXM window.

Page 187
Image 187
HP Manager Software Accessing the WX, Switch Wizard, Configuration file, See Adding a WX Switch to the Network Plan on