HP Manager Software manual Settings, and so on. This page is shown above

182CHAPTER 5: CONFIGURING WX SYSTEM AND ADMINISTRATIVE PARAMETERS

„Blank — Error. Comparison of the parameters against the 3WXM rules resulted in an error for at least one of the rules.

3WXM allows you to deploy the switch parameters to a switch if all checkmarks are green. You also can deploy the parameters to a switch if some checkmarks are orange, although 3Com recommends that you carefully review the warnings first. You cannot deploy the switch parameters if any of the checkmarks are blank.

In the example above, the enable password for the switch is not specified. Since the enable password is required for 3WXM to access and manage a WX switch, but is optional on the WX switch itself, the box around the WX Properties checkmark is yellow to indicate a warning condition, and the warning is explained in the verification results at the bottom of the wizard.

If you disable a rule, the checkmark for the rule is automatically green. (For information about disabling rules, see “Verifying Configuration Information” on page 327.)

System and The System and Administrative page enables you to configure basic Administrative Page switch parameters such as port types, VLANs, IP interfaces, time and date

settings, and so on. This page is shown above.