390CHAPTER 10: MONITORING THE NETWORK

2Select one of the following:

„Find a specific user — to find a user using specific search attributes. Go to step 3.

„Find all users — to find all users. Go to step 4.

3Use any or all of the following search criteria:

„In the Username box, specify the username of the user you want to find.

„In the IP Address box, specify the IP address of the user.

„In the MAC Address box, specify the MAC address of the user.

„In the VLAN Name box, specify the VLAN whose users you want to find.

When specifying search criteria, you must provide an exact match. For a username, you can also specify the prefix of the username.

For example, to find natasha@example.com, you could specify the following:

„natasha@example.com

„nat

Wildcards are not supported in search criteria. For example, the user natasha cannot be found if you specify nat* in the Username box.

4In the Mobility Domain list, select the Mobility Domain that you want to search.

5In the Wireless Switch list, select a specific WX switch, or select All.

If you select All, you must have a seed device defined for the Mobility Domain in order for the search to be successful.

Page 390
Image 390
HP Manager Software manual „ natasha@example.com