164CHAPTER 4: PLANNING THE 3COM MOBILITY SYSTEM

4To change the radio type for which to assign channels, select the radio type from the Technology list. By default, 3WXM assigns channels for all radio types on the MAP access points placed in the building.

5To prevent 3WXM from taking the channel assignments for the floor above into account when calculating the channel assignments for a floor, clear Use Cross-Floor Channel Information.

6Click Next. The Channel Assignment Progress page appears.

7Review the results. The 802.11a channel assignments are listed on the 802.11a Radio(s) tab. The 802.11b/g channel assignments are listed on the 802.11b/g Radio(s) tab.

8Click Finish to accept the channel assignments.

The new channel assignments are reflected in the Coverage Areas panel.

Page 164
Image 164
HP Manager Software manual Planning the 3COM Mobility System