Generating a Rogue Summary Report 451

Generating a Rogue The rogue summary report lists information about rogues.

Summary Report

The data for this report comes from the monitoring service. The Enable Rogue Detection option, located in the Rogue Detection group box of the Monitoring Settings tab, must be enabled. (See “Changing Monitoring Settings” on page 489.)

1Select Reports > Rogue Summary from the toolbar in the main 3WXM window.

The Rogue Summary Report dialog box appears.

2Select the scope type of the report from the Report Scope Type drop-down list:

„Mobility Domain

„Site

„Building

„Floor

3Select the instance for which you want the report. For example, if the scope is Building, select the building.

4Select the time period for the report:

„1 Hour

„24 Hours

„7 Days

„30 Days

5To change the output directory for the report, click on the button next to output directory, navigate to the new directory, and click Select.

6To prevent 3WXM from replacing an existing report of the same type with this new report, click next to Overwrite Existing Files to deselect this option.

7Click Generate.

8When the report is generated, click the report link to view it.

The report lists the BSSIDs of the rogues detected by each WX switch. The report also shows graphs of the distribution of rogues on the WX switches, and of trend data.

Page 451
Image 451
HP Manager Software manual Generating a Rogue Summary Report