HP Manager Software manual Lists the object that can appear under Third Party APs

Organizer Panel 49

Table 9 WX Switch Objects (continued)

IP Services	Settings for IP parameters:
	„ IP routes to the default gateway
	„ IP aliases
	„ Domain Name Service (DNS) settings
	„ Network Time Protocol (NTP) settings
	Address Resolution Protocol (ARP) settings

Table 10 lists the object that can appear under Third Party APs.

Table 10 Third Party AP Objects

Object	Description
AP: name	Configuration parameters for a third-party (non-3Com) AP.
	3WXM takes these third-party access points into consideration
	when calculating MAP access point placement, channel settings,
	and power settings. In addition, WX switches do not issue
	countermeasures against these access points

Site Objects The Sites section of the Organizer panel contains objects for the buildings where you want to deploy 3Com equipment. A site can contain one or more buildings and each building can contain one or more floors. Each floor contains objects for wiring closets, coverage areas, MAP access points, and third-party access points.

Table 11 lists the objects in a site.

Table 11 Third Party AP Objects

Object	Description
Building	Building in the selected site.
Floor	Floor in the selected building.
Wiring Closet	Wiring closet (switching closet) on the selected floor. During
	planning for 3Com equipment placement, 3WXM places WX
	switches in the wiring closets.