HP Manager Software manual Configuring To configure encryption, follow these steps, Encryption

240CHAPTER 6: CONFIGURING WIRELESS PARAMETERS

Configuring To configure encryption, follow these steps:

Encryption

1In the Create Service Profile wizard, click Encryption. The Encryption page appears.

2Select the encryption types you want to use:

„WPA

„WEP

„RSN(WPA2)

„WEP+WPA

„WEP+RSN

„WEP+WPA+RSN

„WPA+RSN

„RSN

Microsoft Windows XP does not support WEP with WPA or RSN. To configure a radio profile to provide WEP for XP clients, select WEP only.

3Go to one of the following sections:

„“Configuring WEP”

„“Configuring WPA or RSN” on page 242

Configuring WEP

By default, dynamic WEP is enabled. You do not need to specify any WEP keys when using dynamic WEP.

If you use dynamic WEP, 802.1X must also be configured on the client in addition to WEP.

To use static WEP, you must provide WEP keys. You can specify the WEP keys, as well as the WEP unicast and multicast key indexes to be used. You can also specify whether shared key authentication is enabled.