HP Manager Software manual Creating or Modifying Buildings in a Site

Creating or Modifying Buildings in a Site 109

7Do one of the following:

„Click Apply Changes to apply the numbering changes to the plan.

„Click Ignore Changes to clear the changes without applying them.

8Do one of the following:

„Click the Floor Defaults tab to change the default values for unit of measurement, ceiling height, and attenuation caused by ceilings. See “Modifying Floor Defaults”.

„Click Next to configure floor information for the building. (See “Importing or Drawing Floor Details”.)

„Click Finish to close the wizard and save the changes.

Modifying Floor 3WXM applies the following values to each floor by default. The defaults Defaults apply to all floors in the building plan.

„Unit of measurement is in feet.

„Ceiling height is 10 feet.

„Ceilings have attenuation of 10 dB for 802.11b/g and 802.11a.

1In the Building wizard, click the Floor Defaults tab. The floor default settings appear.

2In the Unit of Measurement list, select Feet or Metric. If you are importing a drawing of a floor plan, choose the measurement system the drawing uses.

3In the Height of the Ceiling box, type the number of feet or meters from the floor to the ceiling (1 to 1000 feet or meters).