HP Manager Software Building Wizard, Network design information, Live network, Rogue devices

4	PLANNING THE 3COM MOBILITY
	SYSTEM

	The 3Com Wireless LAN Switch Manager (3WXM) planning tools help
	you plan your mobility system. This chapter discusses the Building wizard
	and describes how to create a site, create or modify buildings, import or
	draw floor details, specify the RF characteristics of a floor, define a
	wireless coverage area, compute MAP placement, and generate RF
	network design information.
Building Wizard	The 3WXM planning tools calculate the 3Com equipment you need, how
Overview	to configure it, and where to install it, all based on the information you
	provide about your wireless coverage needs.
	You can display projected coverage, and even experiment with network
	changes. You can also optimize the plan based on RF measurements from
	the live network.
	In addition, when you add the geographical information about your
	network to 3WXM, you can use 3WXM to visually find network clients or
	rogue devices.

Accessing the The planning tools are provided by the Building wizard. To access the Building Wizard wizard, do one of the following:

„If you are creating a new site, navigate to the Building page in the Site wizard, and either select Building1 and click Modify, or click New Building. (To create a site, see “Creating a Site” on page 105.)

„If you are modifying an existing site, right-click on a building name or floor name under a site in the Sites section of the Organizer panel and select Edit.