HP Manager Software To configure user group authentication properties, Click Choose Available

Creating and Managing Users in the Local User Database 271

8In the User Group list, select a user group to assign the user to, if the group is already configured.

You do not need to assign a user to a user group. If you do select a user group, you only need to specify a password for the user. All other attributes are obtained from the user group.

9Do one of the following:

„To configure user attributes, see “Configuring User Authorization Attributes” on page 274.

„To configure a user group, see “Creating Named User Groups”.

„To close the Create User wizard and save the changes, click Finish.

Creating Named User When creating a user group, you define common properties for the Groups group. You can optionally define user attributes, which are stored in the

local database. Attributes defined for an individual user override those attributes defined for a user group.

To configure user group authentication properties

1Access the WX Switch wizard for the WX switch. (See “Accessing the WX Switch Wizard” on page 187.)

2Select AAA at the top of the wizard, if not already selected.

3Select User Group from the organizer list on the left side of the page, if not already selected.

4Click New and select New User Group. The Create User Group wizard appears.

5In the User Group Name box, type a name for the user group (1 to 60 alphanumeric characters, with no spaces or tabs).

6In the VLAN Name box, type the VLAN that the user group belongs to (1 to 16 alphanumeric characters, with no spaces or tabs). The WX switch will authorize the users in this group for that VLAN. For more information on VLANs, see “Configuring VLANs” on page 189.

7Click Choose Available.

8Select a user to be included in this user group.

„To select multiple contiguous users, click Shift while selecting.

„To select multiple noncontiguous users, click Ctrl while selecting.

9Repeat step 7 and step 8 for each user you want included in this group.