HP Manager Software manual Local database, To configure MAC address user authentication properties

272CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS

10Do one of the following:

„To configure user attributes, see “Configuring User Authorization Attributes” on page 274.

„To close the Create User Group wizard and save the changes, click Finish.

Creating MAC When creating MAC address users, you configure authentication Address Users properties. You can optionally configure user attributes, which are stored

in the local database.

To configure MAC address user authentication properties

1Access the WX Switch wizard for the WX switch. (See “Accessing the WX Switch Wizard” on page 187.)

2Select AAA at the top of the wizard, if not already selected.

3Select User from the organizer list on the left side of the page, if not already selected.

4Click New and select New MAC Address User. The Create MAC Address User wizard appears.

5In the User MAC Address box, type the MAC address for the user device, using colons (:) as delimiters. You must specify all 6 bytes of the MAC address.

6In the VLAN Name box, type the name of the VLAN that the user device belongs to (1 to 16 alphanumeric characters, with no spaces or tabs). The WX switch will authorize the user for that VLAN. For more information on VLANs, see “Configuring VLANs” on page 189.

7In the MAC User Group list, select the MAC user group that the user device belongs to, if the group is already configured.

8Do one of the following:

„To configure user attributes, see “Configuring User Authorization Attributes” on page 274.

„To configure a MAC address user group, see “Creating MAC Address User Groups”.

„To close the Create MAC Address User wizard and save the changes, click Finish.