HP Manager Software manual Configuring Wireless Parameters

252CHAPTER 6: CONFIGURING WIRELESS PARAMETERS

You can see that the port has been labeled as a MAP port and has PoE enabled. Enable all ports as MAP ports by selecting MAP Enabled in the MAP Enabled column heading.

5Click in the Name column for a MAP port you enabled, and type a name for it (1 to 16 alphanumeric characters, with no spaces or tabs).

6To select the MAP type, click on the MAP Type cell for the port, and select the MAP type from the list.

7To select the radio type for a single-radio model, click the MAP Radio Type box and select the radio type from the list:

„11a — 802.11a

„11b — 802.11b only

„11g — 802.11b/g

8To disable PoE, clear the PoE checkbox for the port.

9Do one of the following:

„To modify MAP settings, click Modify MAP and see “To modify MAP attributes”.

„Click Finish to save the changes and close the wizard.

To modify MAP To modify MAP attributes, use the following procedure. attributes

1On the MAP page of the Wireless page of the WX Switch wizard, select a MAP port, then click Modify MAP. The Modify MAP wizard appears.

2Select the MAP model from the MAP Model list.

3To select the radio type for a single-radio model, click the MAP Radio Type box and select the radio type from the list:

„11a — 802.11a

„11b — 802.11b only

„11g — 802.11b/g

4In the Name box, type a name (1 to 16 alphanumeric characters, with no spaces or tabs).

5In the Serial Number box, type the serial ID of the MAP.