HP Manager Software manual Mapping an ACL to a Port, Mapping an ACL to a Virtual Port

318CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS

6In the Name list, select the VLAN name from the list.

Only names of VLANs that have previously been created appear in the list.

7Click Finish to save the mapping. The Create ACL wizard reappears.

8Click Finish to close the Create ACL wizard.

Mapping an ACL to a Port

1In the ACL Map page, click New.

2Select New ACL Port Map. The Create ACL Port Map dialog box appears.

3In the Direction list, select In to filter incoming packets or Out to filter outgoing packets.

4In the Port list, select the port or port group to which you want to map the ACL.

You cannot map an ACL to a MAP port or a wired authentication port.

5Click Finish to save the mapping. The Create ACL wizard reappears.

6Click Finish to close the Create ACL wizard.

Mapping an ACL to a Virtual Port

To map an ACL to a virtual port:

1In the ACL Map Setup page, click New.

2Select New ACL VPort Map. The Create ACL VPort Map dialog box appears.

3In the Direction list, select In to filter incoming packets or Out to filter outgoing packets.

4In the Tag Value box, specify the 802.1Q tag value that identifies a virtual port in a VLAN.

The tag value can be a number from 1 to 4095. The default value is 1.

Make sure that you do not specify duplicate mappings that specify the same port and tag value.

5In the port list, select the port to which you want to map the ACL. You cannot map an ACL to a MAP port or a wired authentication port.

6Click Finish to save the mapping. The Create ACL wizard reappears.

7Click Finish to close the Create ACL wizard.