Configuring and Applying Policies 347

Table 30 Configuration Information

 

 

For This Feature Area

See...

 

 

Admin and Network Access

“Configuring and Managing Access Rules for

Rules

Administrative Users” on page 280

 

“Configuring and Managing Access Rules for

 

Network Users” on page 286

RF Detection

“Detecting and Combatting Rogue Devices” on

 

page 419

VLANs and Spanning Tree

“Configuring VLANs” on page 189

Properties

 

Service Profiles and Radio Profiles

Mobility Profiles

Local User Database

“Configuring a Service Profile” on page 238.

“Configuring a Radio Profile” on page 245

“Configuring Mobility Profiles” on page 306

“Creating and Managing Users in the Local User Database” on page 269

Location Policy

“Configuring Location Policies” on page 299

 

 

9Click Next. The Policy Member Selection page appears.

10In Available Devices column, select the switches to which you want to apply the policy, then click Add to move the switches to the Current Devices column.

Moving a switch to the Current Devices column automatically applies the policy settings that were in the policy when you first associated it with a switch. However, if you have made changes to the policy subsequent to associating it with a switch, the changes are not automatically applied. To apply the changes, click Finish to save the policy, then select Manage > Policy Manager from the menu bar and go to “Reviewing and Applying Policy Settings”.

11Click Finish to save the policy and close the wizard. Go to “Reviewing and Applying Policy Settings”.

Reviewing and

Applying Policy

Settings

1If you have not already done so, use the procedure in ““Configuring a Policy” on page 346 to configure a policy and select the switches to which you want to apply the policy.

2Select Manage > Policy Manager from the toolbar in the main 3WXM window.

Page 347
Image 347
HP Manager Software manual Reviewing Applying Policy Settings, Configuration Information