HP Manager Software manual Rebooting WX, Switches or MAP Access Points, Click Review Changes

348CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS

The Policy Manager window appears.

3Select the policy from the Select Policy drop-down list.

4Select the switches in the Devices column.

5Click Review Changes.

For each switch you select, a tab appears. Each tab lists the CLI commands for the configuration changes that will be applied to the switch if you accept the changes.

6To apply the changes from the policy to the switches, click Apply Changes, then click Close.

To cancel without applying the changes, click Close without clicking Apply Changes.

If you apply the changes, 3WXM applies the changes to the switches in the network plan. However, the changes are not yet applied to the switches in the live network. To apply the changes from the network plan to the network, select Manage > Managed Devices. (See “Synchronizing Local and Network Changes” on page 333.)

Rebooting WX	You can use 3WXM to reboot WX switches and MAP access points.
Switches or MAP
Access Points

1Select Manage > Reboot WX/MAP Devices from the toolbar in the main 3WXM window. The Reboot WX/MAPs dialog box appears.

2In the Mobility Domain Selection list, select the Mobility Domain the WX or MAP you want to reboot is in.

3Do one of the following:

„To reboot a WX, select it from the list on the Wireless Switch tab.

„To reboot a MAP, click Managed Access Point, and select the MAP(s) you want to reboot.

To select multiple items, press Shift (for contiguous items) or Control (for noncontiguous items) while clicking items.

4Click Reboot.

Information about the rebooting process is shown in the Status column.

5Click Close to close the dialog box.