HP Manager Software manual Using the Status, Summary Window

366CHAPTER 10: MONITORING THE NETWORK

Table 34 RF Measurement Information (continued)

Item	Value
Show MAPs on Other	Show the MAPs located on other floors that can be
Floors	detected from this RF measurement point.
MAP/AP	MAP or third-party access points detected.
Distance (Feet)	Distance between MAP and RF measurement point.
Channel	Channel of the MAP or third-party access point.
RSSI (dBm)	Signal strength from the MAP at the RF measurement
	point.
Status	Whether the MAP or third-party is active (OK) or disabled.

You can change the RSSI options even after measurement data is displayed. The data is immediately updated. To take a new measurement, click on the new measurement point. The measurement data is immediately updated for the new measurement point.

Using the Status	The Status Summary window shows the operational status of 3Com
Summary Window	equipment (WX switches, their MAP access points, and MAP radios). The
	Status column shows the equipment status, using the same colors as the
	Explore window. Additional information is displayed for each equipment type.

Double-click on a row in the Status Summary window to display more information about the object.