Mobility Profiles, Attribute VSA | HP Manager Software instruction

306CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS

Configuring	Mobility Profile™ attributes allow or deny access to the network for a
Mobility Profiles	specific user or group of users. When you create a Mobility Profile, you
	specify which MAP ports, Distributed MAPs, or wired authentication ports
	are to be included. Typically, you include ports that are defined as MAP
	ports or Distributed MAPs. You can specify that all or no ports are
	included, or you can specify a list of ports to be included.
	After creating a Mobility Profile, you can assign it to users created in the
	local WX user database, or users who are authenticated and authorized
	by a RADIUS server. You assign the name of the Mobility Profile by using
	the Mobility-Profile RADIUS attribute, which is a 3Com vendor-specific
	attribute (VSA).

To create a Mobility Profile

1Access the WX Switch wizard for the WX switch. (See “Accessing the WX Switch Wizard” on page 187.)

2Select AAA at the top of the wizard, if not already selected.

3Select Mobility Profile from the organizer list on the left side of the page, if not already selected.

4Click New Mobility Profile. The Create Mobility Profile wizard appears.

5In the Profile Name box, type the name of the Mobility Profile.

The name can be up to 16 alphanumeric characters, and it cannot contain tabs.

6In the Ports list, specify ports to include in the Mobility Profile:

All — Include all MAP or wired authentication ports. Go to step 11.

Selected — Include a selected list of ports. Go to the next step.

None — Include no ports. Go to step 11.

7Click Choose Available and select a port. Repeat for each port.

8In the Distributed MAPs list, specify the Distributed MAPs to include in the Mobility Profile:

All — Include all Distributed MAPs. Go to step 11.

Selected — Include a selected list of Distributed MAPs. Go to the next step.

None — Include no Distributed MAPs. Go to step 11.