HP Manager Software manual Click View Work Order

Generating a Work Order 453

Generating a Work A work order provides all of the necessary information for the physical

Orderinstallation of the 3Com Mobility System. A work order shows where the MAP access points should be installed, WX initial setup configuration information, and projected RSSI information that is useful when verifying the installation.

The work order has meaning only after you add planning information. (See “Planning the 3Com Mobility System” on page 95.)

1Select Reports > Work Order from the toolbar in the main 3WXM window.

The Work Order Generation dialog box appears.

2Select the scope for the work order. You can select the network plan, a site, a building, or an individual floor.

3Select the options you want to use for the report:

„RF Coverage

„RSSI Projections

„Show Disabled MAPs (only available if RSSI Projections is selected)

„Show RF Coverage On Entire Floor (only available if RSSI Projections is selected)

„Show Unreachable MAPs (only available if RSSI Projections is selected)

„Show MAPs on Other Floors (only available if RSSI Projections is selected)

4Select the language:

„English

„German

5To change the output directory for the report, click on the button next to output directory, navigate to the new directory, and click Select.

6Click Generate.

7When the report is generated, click View. A browser window containing the report opens.

8Optionally, select the floor.

9Click View Work Order.