HP Manager Software manual Configuring Wireless Parameters

254CHAPTER 6: CONFIGURING WIRELESS PARAMETERS

Select No to disable automatic firmware upgrading. Automatic firmware upgrading is enabled by default.

10Do one of the following:

„To modify radio settings for the MAP, see “To modify radio settings”.

„To modify connection settings for the MAP, see “To modify a MAP connection” on page 257.

„To save changes and close the wizard, click Finish.

To modify radio To modify radio settings, use the following procedure. settings

1On the MAP page of the Wireless page of the WX Switch wizard, select a MAP port, then click Modify MAP. The Modify MAP wizard appears.

2Click Next. A radio page appears.

3To enable the radio, select Enabled.

4If the MAP model supports external antennas, select the external antenna model from the Antenna Type box.

„An MP-nnn 802.11b/g radio can use one of the following antenna models:

„Internal

„ANT1060

„ANT1120

„ANT1180

„An MP-nnn 802.11a radio can use one of the following antenna models:

„Internal

„ANT5060

„ANT5120

„ANT5180

„An APnnnn radio can use one of the following dual-band antenna models:

„Internal

„ANT3C591

„ANT3C592

„ANT3C597

„ANT3C598