HP Manager Software manual Go to To use the Create RF Obstacle Dialog box on

Specifying the RF Characteristics of a Floor 131

3Go to “To use the Create RF Obstacle Dialog box” on page 132.

To create RF obstacles for an area in a drawing

1Diagonally drag the cursor over the area where you want to create RF obstacles.

2Right-click, and select Create RF Obstacle. The Create RF Obstacle dialog box appears.

3Go to “To use the Create RF Obstacle Dialog box” on page 132.

To create RF obstacles for multiple selected objects in a drawing

1Click an object on the floor.

2Press Shift while clicking on additional objects.

3Right-click, and select Create RF Obstacle. The Create RF Obstacle dialog box appears.

4Go to “To use the Create RF Obstacle Dialog box” on page 132.

To create RF obstacles by grouping objects

You can group several objects in a drawing to specify them as one RF obstacle. For example, if a wall consists of several lines, the lines can be grouped. If you subsequently ungroup the objects, the RF obstacle information is removed.

1Select an object on the floor.

2Press Shift while clicking additional objects.

3Click the Group Objects icon. The grouped objects now appear as one object group.

4Right-click, and select Create RF Obstacle. The Create RF Obstacle dialog box appears. See “To use the Create RF Obstacle Dialog box”.