HP Manager Software manual Monitoring the Network

414CHAPTER 10: MONITORING THE NETWORK

3In the IP Address box, type an IP address or a partial IP address.

For example, if you type 10.20, you see all events that pertain to IP addresses containing the string 10.20.

Set the search criteria by selecting contains the string, contains all of the strings, or contains at least one of the strings.

4In the Date list, select one of the following to filter events by time:

„Any — No events are filtered based on time criteria.

„Before — Only events that occurred before a specified time

„In the Start box, click the arrow to use the calendar to specify the day, month, and year.

„Specify the end time.

„After — Only events that occurred after a specified time

„In the Start box, click the arrow to use the calendar to specify the day, month, and year.

„Specify the starting time.

„Between — Only events that occurred between specified times

„In the Start box, click the arrow to use the calendar to specify the day, month, and year.

„Specify the starting time.

„In the End box, click the arrow to use the calendar to specify the day, month, and year.

„Specify the end time.

5In the Show list, select one of the following:

„All — To see all log entries

„Last — To see a specified number of entries at the bottom of the log

„First — To see a specified number of entries at the top of the log

If you selected All, go to step 7. Otherwise, go to the next step.

6In the Matching Entries box, type the number of log entries you want to see.

The maximum number of entries you can specify depends on the number of entries in the log.

7Click Refresh in the Event tab’s toolbar to see the filtered events.