HP Manager Software manual Configuring WX Management Services

Configuring WX Management Services 221

5In the Start Hour box, specify the hour (between 0 and 23) to start the time change.

6In the Start Minute box, specify the minute (between 0 and 59) when the time change starts.

7In the End Month list, select the month of the year when the time change ends.

8In the End Week list, select the week of the month when the time change ends (First, Second, Third, Fourth, or Last).

9In the End Day list, select the day of the week when the time change ends.

10In the End Hour box, specify the hour (between 0 and 23) when the time change ends.

11In the End Minute box, specify the minute (between 0 and 59) when the time change ends.

12Do one of the following:

„Go to “Configuring Wired Authentication Ports”.

„Select another item in the WX Switch wizard, if you are using this wizard.

„Click Finish to close the wizard and save changes.