HP Manager Software manual To generate a work order, Click Generate Work Order

Generating RF Network Design Information 175

Generating a Work You can generate a work order as part of your wireless network Order planning. The work order provides all of the necessary information for the

physical installation of the 3Com Mobility System. A work order shows where the MAP access points should be installed, WX initial setup configuration information, and projected RSSI information that is useful when verifying the installation.

After deployment, you can generate a work order with the optional RSSI projection tables and MAP MAC addresses, and use it for post-deployment verification.

To generate a work order

1In the Work Order Options group box, specify whether to include the following information in the work order:

„RF Coverage

„RSSI Projections

„Show Disabled MAPs (only available if RSSI Projections is selected)

„Show RF Coverage On Entire Floor (only available if RSSI Projections is selected)

„Show Unreachable MAPs (only available if RSSI Projections is selected)

„Show MAPs on Other Floors (only available if RSSI Projections is selected)

2In the Language list, select English or German.

The language you select is the language used when you next access this page.

3To select the directory to which the inventory report is saved, click Choose. The Select dialog box appears.

4Navigate to the directory you want, and click Select.

3WXM uses this directory when generating subsequent reports. For UNIX and Linux systems, the default directory is the home directory of the user running 3WXM.

5Click Generate Work Order.

The work order is saved in the directory you specified in the format

WO_scope_name_date. If you generate another order for the same scope on the same day, the old work order is overwritten.