HP Manager Software manual Adding a Device to, Attack List, To add a device to the ignore list

Ignoring Friendly Third-Party Devices 431

Ignoring Friendly By default, when countermeasures are enabled, MSS considers any Third-Party Devices third-party transmitter to be a rogue device and can send

countermeasures to prevent clients from using that device. To prevent MSS from sending countermeasures against a friendly device, add the device to the known addresses list.

To add a device to the ignore list

1In the Filtered List of rogues on the Rogue Detection tab, select the devices you want to add to the ignore list.

2Click on the toolbar. The Select Devices to Create Ignore List dialog is displayed.

3If the switch(es) on which you are configuring the ignore list are in a Mobility Domain, select the Mobility Domain. Otherwise, select None.

4Click Next to select to select all the switches that are listed, or click Next to individual switches to select them.

5Click OK. The devices are added to the ignore list and disappear from the Filtered List of rogues.

Adding a Device to	An attack list is a switch’s list of AP MAC addresses to attack whenever
the Attack List	they are present on the network.

1In the Filtered List of rogues on the Rogue Detection tab, select the devices you want to attack.

2Click on the toolbar. The Select Devices dialog is displayed.

3If the switch(es) on which you are configuring the attack list are in a Mobility Domain, select the Mobility Domain. Otherwise, select None.

4Click Next to Select to select all the switches that are listed, or click Next to individual switches to select them.

5Click OK. The devices are added to the attack list. If countermeasures are enabled, MSS uses them to attack the devices on the list.