HP Manager Software manual Attribute Description Valid Values Filter-id, Idle-timeout

276CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS

Table 24 Authentication Attributes for Local Users (continued)

Attribute	Description	Valid Value(s)
filter-id	Inbound or outbound	If configured in the WX switch’s local
	ACL to apply to the	database, this attribute can be an
	user.	access control list (ACL) to filter
		outbound or inbound traffic. Use the
		following format:
		inboundacl.in
		or
		outboundacl.out
		If you are configuring the attribute on
		a RADIUS server, the value field of
		filter-id can specify up to two ACLs.
		Any of the following are valid:
		filter-id = "Profile=acl1"
		filter-id = "OutboundACL=acl2"
		filter-id = "Profile=acl1
		OutboundACL=acl2"
		(Each example goes on a single line on
		the server.) The format in which to
		specify the values depends on the
		RADIUS server.
		Regardless of whether the attributes
		are defined locally or on a RADIUS
		server, the ACLs must already be
		configured on the WX switch.
		(For more information, see “Mapping
		User-Based ACLs” on page 316.)
idle-timeout	This option is not implemented in the current MSS version.