HP Manager Software manual Toolbar Options on Verification Tab, Refresh Refreshes the data Options

328CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS

The Verification tab contains a Config Verification tab and a Network

Verification tab:

„The Config Verification tab shows errors and warnings for WX switch configuration information in 3WXM.

„The Network Verification tab shows errors and warnings for configuration information in the network. The errors and warnings can be for WX switch configuration items and for the monitoring service.

On each tab, the Message column lists error descriptions in red and lists warning descriptions in orange:

„Errors are serious problems that must be addressed before deployment. By default, you cannot deploy a network plan with errors in it. After fixing errors, verify the network plan again to ensure that the errors have been resolved.

„Warnings are noncritical issues that do not stop deployment. Review any warnings and consider resolving the issues before deployment.

Details about the selected error or warning appear in the lower left section of the tab.

The Resolution section of the tab lists options for resolving the warning or error.

Toolbar Options Table 28 lists the options on the Event tab’s toolbar.

Table 28 Toolbar Options on Verification Tab

Option	Description
Refresh	Refreshes the data.
Options	Displays the Verification Options dialog box, which enables
	you to change verification options and disable or reenable
	rules. (See “Changing Verification Options” on page 330.)