HP Manager Software manual

310CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS

7In the Destination IP box, type the destination IP address and destination wildcard mask in CIDR notation.

8In the TOS box, type a TOS value from -1 to 15.

The following lists specific values and their meanings:

„-1 (any) — All packets are subject to the ACE regardless of whether TOS is set.

„0 (normal) — Packets with normal TOS defined are filtered.

„1 (minimum monetary cost) — Packets with minimum monetary cost TOS defined are filtered.

„2 (maximum reliability) — Packets with maximum reliability TOS defined are filtered.

„4 (maximum throughput) — Packets with maximum throughput TOS defined are filtered.

„8 (minimum delay) — Packets with minimum delay TOS defined are filtered.

By default, the TOS value is -1 (any).

In addition to these specific values, you can specify a number from 1 to 15 that is the sum of TOS option values. For example, to select minimum delay and maximum throughput as the TOS options, type 12, which is the sum of the two values.

9In the Precedence list, select one of the following:

„Any (-1)— All packets are subject to the ACL regardless of whether precedence is set.

„Routine (0) — Packets with routine precedence are filtered.

„Priority (1) — Packets with priority precedence are filtered.

„Immediate (2) — Packets with immediate precedence are filtered.

„Flash (3) — Packets with flash precedence are filtered.

„Flash Override (4) — Packets with flash override precedence are filtered.

„CRITIC/ECP (5) — Packets with critical precedence are filtered.

„Internetwork Control (6) — Packets with internetwork control precedence are filtered.

„Network Control (7) — Packets with network control precedence are filtered.